Honeywell 104484A Aquastat Seal-Off Fitting, 1/2" NPT

Description

Features:

Immersion wells and compression fittings are available to fit a 1/2-14″ or 3/4-14″ NPT tapping with a range of insulation depths.
Immersion wells and compression fittings are available in a variety of lengths and diameters.
Immersion wells and compression fittings are available in a variety of materials, to suit the application. Materials include: brass, copper, stainless steel, mild steel or Monel.
Element holders support the capillary and bulb or an averaging element in duct applications.
Bulb shields protect the sensing bulb from sun and weather with the bulb installed outdoors.
Accessories, including mounting clips, heat-conductive compound, waste nuts, a pipe strap and a well adapter, are available for mounting sensing bulbs in various applications.
Immersion wells allow heat transfer while protecting the sensing bulb from contact with the controlled medium.
Immersion wells permit removal of the sensing bulb for testing or replacement without draining the system.
Compression fittings seal the boiler and allow bulb insertion directly into the controlled medium.

Specifications:

Manufacturer: Honeywell
Manufacturer Part Number: 104484A
Other Materials: Maximum temperature rating limits of the controller sensing bulb and capillary
Wells:Copper: 300°F (149°C) maximum
Capillary Compression Fittings: 250°F (121°C) maximum
Element Holders: 311266D
Bulb Holder: -40°F to +100°F (-40°C to +38°C).Other Element Holders: Maximum temperature rating limits of the controller sensing bulb and capillary
Maximum Pressure Ratings:Copper Wells: 255 psi (1758 kPa) at 300°F (149°C)
Other Wells: 1500 psi (10,342 kPa) at 700°F (371°C)
Capillary Compression Fittings:Water: 50 psi (345 kPa)Air: 15 psi (103 kPa)